rotork CVQ 1200, Инструкция по установке и обслуживанию

Страница: 31 / 52

0 pt
31
Established Leaders in Valve Actuation Technology
Fig. 33.2
Fig. 33.1
When the output shaft is in the desired position, the travel
limit can be set using the SET OPEN / SET CLOSE box.
Set Close Limit
Use the Position Control Slider to move the actuator output
shaft to the required Closed position.
Click on the ‘Set Close’ box to calibrate the closed limit of
travel. The ‘Set Close’ and the ‘Serial’ number boxes are
‘greyed’ out during the calibration procedure and indicate
acceptance of the new settings when cleared.
The new close limit position is now shown on the main scale
Indicator.