rotork CVQ 1200, Инструкция по установке и обслуживанию

Страница: 30 / 52

Title Here
30
Installation & Setup Guide
To Enable electrical operation move the Selector Knob
to the RUN position.
CAUTION
Note: The actuator may respond to any present remote
control requests during loss of Bluetooth commands or
when navigating between screens.
It is now possible to turn the output shaft to the desired
Position using the position control slider.
CAUTION
The actuator will be taken offline and will respond to
the position control slider.
Confirm that settings are correct before attempting to
move the actuator.
Click on OK to proceed.
Fig. 32.2 Fig. 32.1 Fig. 32.3