rotork CVQ 1200, Инструкция по установке и обслуживанию

Страница: 26 / 52

Title Here
26
Installation & Setup Guide
The Auto Setup is fully automatic and requires no user input
Start Auto Setup?
Click on the ‘START’ box to initiate the Auto setup procedure.
Click on the OK box to continue. All other menus will be disabled
until the process is completed.
Finding the Closed Limit
The actuator will turn its output shaft to the maximum
CLOSED limit of travel.
Actuator will then turn its output shaft away from the
Closed limit of travel and repeat the procedure to eliminate
any inertia effects and re-adjust the end of travel limit as
necessary.
Finding the Open Limit
The actuator will turn its output shaft to the maximum Open
limit of travel. Actuator will then turn its output shaft away
from the Open limit of travel and repeat the procedure to
eliminate any inertia effects and re-adjust the end of travel
limit as necessary.
The Open position limit is now set and Auto Setup is
Complete.
Fig. 28.5 Fig. 28.4 Fig. 28.6
Fig. 28.1 Fig. 28.3 Fig. 28.2