Roto-Mix Hay Pro 533-16, Руководство по эксплуатации и запасным частям

Страница: 18 / 57

Page 18
TRUCK OPERATION
TRUCK
For truck operation and limitations, refer to the Truck's owner's manual.
SCALE SYSTEM
Refer to the operation book supplied with the scale indicator head.
FOLLOWING OPERATION:
Following operation, or when unhitching, stop the tractor or towing vehicle, set the brakes, disen
gage the PTO and all power drives, shut off the engine and remove the ignition keys. Store the
unit in an area away from human activity. Do not park equipment where it will be exposed to
livestock for long periods of time. Damage and livestock injury could result. Do not permit children
to play on or around the stored unit. Make sure parked machine is on a hard, level surface and
engage all safety devices. Wheel chocks may be needed to prevent unit from rolling.
MAINTENANCE
ALWAYS DISCONNECT OR DISENGAGE POWER TAKE OFF AND REMOVE
KEYS FROM TRACTOR OR TRUCK BEFORE CLEANING, ADJUSTING, LUBRICATION OR
SERVICING THIS MACHINE. FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH.
The lowered position of the chute is limited by the mechanical interference of the bottom of the
chute and the bottom of the conveyor.
READ THE FOLLOWING BEFORE WELDING ON THIS MIXER/FEEDER
When welding on your mixer/feeder, do not allow the current to flow through the ball bearings or
the roller chains. Ground directly to the item being welded. Always disconnect the scale
instrumentation from the weigh bars or load cells and the power source. Be sure the current does
not pass through weigh bars or load cells or scale indicator. The alternator should always be
disconnected if the mixer/feeder is not disconnected from the towing vehicle.