Roto-Mix Hay Pro 533-16, Руководство по эксплуатации и запасным частям

Страница: 10 / 57

Page 10
THERE ARE ADDITIONAL HAZARDS ASSOCIATED WITH THE SER ICE AND
MAINTENANCE OF YOUR MIXER.
FOR YOUR SAFETY:
Disengage power take-off and remove keys from tractor or truck before servicing a mounted mixer.
Do not attempt to clean, oil or adjust mixer while it is in motion.
Stop the engine and be sure PTO driveline is stopped before making adjustments, connections, or
cleaning out PTO driven equipment. Disconnect PTO shaft.
Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle in a closed
building. The exhaust fumes may cause asphyxiation.
Before working on the mixer/feeder, stop the towing vehicle, set the brakes, disengage the PTO
and all power drives, shut off the engine and remove the ignition keys.
Be certain all moving parts on attachments have come to a complete stop before attempting to
perform maintenance.
Before entering mixing chamber or servicing mixer, disconnect main power source and lock the
disconnect device in off position to prevent accidental startup.
Do not work under a trailer mixer without supporting with suitable support stands. Always use a
safety support and block the wheels. Never use a jack to support the machine.
Do not work under a mixer without blocking the wheels to prevent rolling.
A fire extinguisher and first aid kit should be kept readily accessible while performing maintenance
on this mixer/feeder.
Never check battery charge by placing a metal object across the posts. Use a volt-meter or
hydrometer.
Do not charge a frozen battery; it may explode. Warm battery to 16c(60f).
Escaping hydraulic fluid under pressure can penetrate the skin causing serious injury or death.
Avoid the hazard by relieving hydraulic pressure before disconnecting hydraulic or other lines.
Tighten all connections before applying pressure.
Search for hydraulic leaks with a piece of cardboard. Protect hands and body from high pressure
fluids. Never use your hands to locate hydraulic leaks on attachments.
Replace all shields and guards after servicing and before moving.
Do not allow grease or oil to build up on any step or platform.·
Never replace hex bolts with less than grade five (5) bolts unless otherwise specified.
FAILURE TO HEED MAY RESULT IN SERIOUS PERSONAL IN JURY OR DEATH.