Roto-Mix Hay Pro 533-16 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 57

background image

Page 16

PTO ENGAGEMENT

This

mixer is designed with optional 540 or 1000 RPM PTO. Do Not Operate a 540 rpm mixer with

1000 RPM tractor PTO. Avoid high speed sudden engagement of the mixer. Doing so may cause
the shear pin to shear.

CORNERING

Sharp cornering with the PTO engaged is not recommended. If it is necessary to mix when
corning, it should be done at reduced speeds and on wide corners only.

LOADING INSTRUCTIONS & PRECAUTIONS

A. Do not add side board extensions to the mixer.

B. The conveyor begins to move as it is lowered into position, fully engaging after the lifting

cylinders have been fully extended.

DISCHARGING FEED

For Tractors With Hydraulic Lift Option:

The conveyor motor and conveyor tilt are sequenced so when the tractor’s hydraulic control lever
is moved one way, the conveyor will extend downward and the conveyor motor will begin to
operate, fully engaging after the cylinder is fully retracted. The discharge door is operated using
separate hydraulic controls. When through feeding, close the discharge door, clear conveyor of all
remaining feed, and extend hydraulic cylinder to lift conveyor.

For Tractors With Fixed Conveyor Option:

The conveyor motor is actuated using one set of hydraulic controls while the discharge door is
operated using a separate set of hydraulic controls.

SCALE SWING MOUNT

The scale head is mounted to a swing arm. The swing arm is designed to allow scale head viewing
from either side of the mixer or from the tractor just by rotating the scale arm before loading or
unloading starts.

SCALE SYSTEM

Refer to the operation book supplied with the scale indicator head.

TRAILER OPERATION

«
...
14
15
16
17
18
...
»

Содержание Hay Pro 533-16


























































Отзывы:

Нет отзывов

Похожие инструкции для Hay Pro 533-16

Бренд: Landoll Страницы: 52

Бренд: JBSYSTEMS Light Страницы: 14

Бренд: YardShape Страницы: 50

Бренд: DARAY Страницы: 28

Бренд: MacDon Страницы: 88

Бренд: Jiffy Страницы: 15

Бренд: Makita Страницы: 8

Бренд: VECTECH Страницы: 5

Бренд: Yamaha Страницы: 78

Бренд: Fast Страницы: 42

Бренд: DARAY Страницы: 28

Бренд: Backyard Play Systems Страницы: 64

Бренд: Haenim Страницы: 2

Бренд: UNIA Страницы: 62

Бренд: R2 Страницы: 20

Бренд: EarthQuake Страницы: 28

Бренд: TAIKO Audio Страницы: 24

Бренд: Olsen Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды