Roto-Mix Hay Pro 533-16, Руководство по эксплуатации и запасным частям

Страница: 17 / 57

Page 17
HIGHWAY AND TRANSPORT OPERATION
1. Adopt safe driving practices.
2. Keep the brake pedals latched together at all times. Never use independent braking with
machine in tow as loss of control and/or upset of unit can result.
3. Always drive at a safe speed relative to local conditions and ensure that your speed is low
enough for an emergency stop to be safe and secure. Keep speed to a minimum.
4. Reduce speed prior to turns to avoid the risk of overturning.
5. Avoid sudden uphill turns on steep slopes.
6. Always keep the tractor or towing vehicle in gear to provide engine braking when going down
hill. Do not coast.
7. Do not drink and drive.
8. Comply with state and local laws governing highway safety and movement of farm machinery
on public roads.
9. Use approved accessory lighting flags and necessary warning devices to protect operators of
other vehicles on the highway during daylight and nighttime transport.
10. The use of flashing amber lights is acceptable in most localities. However, some localities
prohibit their use. Local laws should be checked for all highway lighting and marking
requirements.
11. When driving the tractor and mixer/feeder on the road or highway under 20 MPH (40 KPH) at
night or during the day, use flashing amber warning lights and a slow moving vehicle (SMV)
identification emblem.
12. Plan your route to avoid heavy traffic.
13. Be a safe courteous driver. Always yield to oncoming traffic in all situations, including
narrowbridges, intersections, etc.
14. Be observant of bridge loading ratings. Do notcross bridges rated lower than the gross weight
at which you are operating.
15. Watch for obstructions overhead and to the side while transporting.
16. Always operate mixer/feeder in a position to provide maximum visibility at all times. Make
allowances for increased length and weight of the mixer/feeder when making turns, stopping
the unit, etc.
LIGHTING AND MARKING
It is the responsibility of the customer to know the lighting and marking requirements of the local
high way authorities and to in stall and maintain the equipment to provide compliance with the
regulations. Add extra lights when transporting at night or during periods of limited visibility.