Roto-Mix Hay Pro 533-16, Руководство по эксплуатации и запасным частям

Страница: 14 / 57

Page 14
Dimensions or Specifications 533-16 Trailer 653-16 Trailer
Weight w/Common Options 14,020 14,700
Width, 3’ Conveyor Up 94” 94”
Conveyor Length Options 3' & 4' 3' & 4'
Height, Trailer Standard Tires 95” 108”
Height, Truck 38” Frame N/A N/A
Discharge Conveyor Width 48" 48"
Bottom Thickness 1/4” 1/4”
Stainless Bottom Liner (std) 12 ga. 12 ga.
Upper Side Thickness 3/16” 3/16”
End Sheet Thickness Lower All Sizes - 3/8” Front - 1/4” Rear
End Sheet Thickness Upper 3/16” 3/16”
Hay Pro Rotor Diameter 34" 34"
Top Auger Diameter 24" 24"
Minimum Horsepower 85 110
Capacity, Cubic Feet 533 653
FEATURES
PRE OPERATION
TRACTOR DRAWBAR
Set tractor drawbar as shown in figure 1.
FAILURE TO SET DRAWBAR PROPERLY MAY CAUSE SHAFT TO OVER EXTEND AND
SEPARATE OR BEND WHEN CORNERING OR TRANSPORTING RESULTING IN DEATH OR
PERSONAL INJURY.
IMPORTANT: Drive components can be damaged from excessive speed. Under no circumstances
should a feed mixer equipped with 540 RPM be operated by a tractor with 1000 RPM PTO.
Feed mixers are available with either 540 or 1000 RPM driveline. Match tractor PTO with the feed
mixer driveline.
IMPORTANT: To prevent driveline damage, adjust tractor drawbar to recommended setting.
Disengage tractor PTO before turning.
Remove clevis if equipped. Turn off set drawbar down.