Rothenberger Industrial 035748, Руководство пользователя

Страница: 8 / 24

8
GB
SYMBOLS USED IN THIS MANUAL
INTRODUCTION
SCOPE OF DELIVERY / PARTS LIST
Congratulations on your purchase of this versatile autogenous mini welder for the demanding DIY
enthusiasts and the true professionals.
Read the complete operating manual and especially follow the safety instructions before using the
device. Keep this operating manual in a safe place and pass it to anyone who uses the device.
= Caution hot!
= Read the operating
manual
= Poisonous
gases
= No oil on oxygen
= Wear eye
protection
= Wear protective gloves
= Keep out of the
reach of children
1 Oxygen pressure reducer with integrated non-
return valve (blue)
2 Gas regulating valve with integrated non-
return valve (orange)
3 Hose package (oxygen hose = blue, gas hose =
orange)
4 Maxigas 400 (propane/butane mixture)
disposable cylinder 600 ml / 338 g
5 Welding goggles according to EN 166
6 Handle with fine control valves
6A Fine control valve for oxygen (blue)
6b Fine control valve for gas (orange)
7 Gas mixing tube
8 High-performance welding nozzle 0.5 mm
9 Oxygen cylinder 0.93 l x 110 bar = approx 102 l
10 Carrying frame with cylinder holder
The devices may only be used with the following gas cylinders and gas types:
- Industrial oxygen: Rothenberger disposable industrial oxygen cylinder 930 ml (35741)
- Rothenberger Industrial Maxigas 400 (Art. No. 35570)
SCOPE OF USE
The device is intended for general welding and soldering, among others, in the fields of precision
engineering, arts and crafts, model making, optics, jewellery, goldsmiths' work, motor vehicle repairs,
bending work, extrusions and dental work.
In addition to welding work, the device is also ideal for brazing. Any other use, modifications to the item or
use of gas other than those listed in this manual counts as misuse and is expressly forbidden.
- The device may only be used in accordance with this operating manual. Any other use can impair the
device's safety features and lead to injuries.
- Oil & grease may not come in contact with the device, especially with oxygen or gas. Therefore, all
parts, hands and clothing must be kept free of oil and grease (risk of explosion!).
- Always wear oil-free and flame-retardant protective clothing.
- During welding or soldering, always wear safety goggles with the appropriate protection classes
according to EN 166.
- Be sure not to inhale any welding / soldering gases.
- After using the devices, even for short-term use, pay attention to the heat transfer of the flame (at the
welding nozzle and mixing tube) in order to avoid burns.
- Make sure that you never put the handle on a flammable surface.
SAFETY INSTRUCTIONS