2
x
Set-up and installation
13
FA ROTEX HPSU compact 308 - 02/2012
2.4.1 Installation of cables
Fig. 2-6
1. Remove the protective cover.
Fig. 2-7
2. Dismount right housing cover.
Fig. 2-8
3. Unlock front panel.
1.
2.
Fig. 2-9
4. Open front panel and place in
assembly position.
Fig. 2-10 5. Route cabling into the regulator
and make the electrical
connections (see section 2.4.2).
Fig. 2-11 6. Lay cables in the right
housing cover.
Fig. 2-12 7. Install the right housing cover.
Fig. 2-13 8. Fasten cabling on the storage
container.
