Rotex HPSU compact 308, Руководство по установке

Страница: 47 / 60

4 x Parameter settings
47 FA ROTEX HPSU compact 308 - 02/2012
8 Configuration of water heating
00 Minimum runtime heat pump 5 0 í 20 1 min.
01 Maximum runtime heat pump 30 5 í 60 5 min.
02 Restart time heat pump 3 0 í 10 0.5 h
03 Delay time for booster function (BOH) (optional) 50 20 í 95 5 min.
04 Additional runtime at [4-02]/[F-01] 95 0 í 95 5 min.
9 Target value temperature ranges for room heating and room cooling
00 Upper limit of target heating value 55 37 í 55 1 °C
01 Lower limit of target heating value 25 15 í 37 1 °C
02 Upper limit of target cooling target value 22 18 í 22 1 °C
03 Lower limit of target cooling target value 5 5 í 18 1 °C
04 Setting for temperature violation 1 1 í 4 1 °C
C Priority Solar Support
00 Solar priority 0 0 í 1 1 —
01 Installation-depending setting 0 0 í 1 1 —
02 Installation-depending setting 0 0 í 2 1 —
03 Installation-depending setting 0 -25 í 25 1 °C
04 Installation-depending setting 3 2 í 10 1 °C
D Low-cost mains connection / weather-dependent local offset value
00 Switch-off in heating element 0 0 í 3 — —
01 Connection of unit to an off-peak mains connection 0 0 í 2 — —
02 Removed. Do not change the default value! 0 — — —
03 Local weather-dependent adjustment value 0 0 í 4 — —
E Display unit information
00 Software version Read only — — —
01 EEPROM version Read only — — —
02 Model ID —
(1
— — —
03 Temperature of refrigerant Read only — 1 °C
04 Water temperature at intake Read only — 1 °C
F Configuration of functions
00 Operation of the circulation pump outside of [4-02]/[F-01] 0 0
í
1 — —
01 Permission for room cooling 20 10
í
35 1 °C
02 Underfloor heating ON temperature 3 3
í
10 1 °C
03 Underfloor heating hysteresis 5 2
í
5 1 °C
04 Functionality of connection X14A — — — —
(1 Value depends on specific model.
Tab. 4 -4 Overview parameter settings
Code 1 Code 2
Parameter name
Default factory settings
Value Range Increment Unit