44
ROTEX GCU compact -
7
x
Gas burner
Burner installation
Ɣ
Assemble the burner in reverse order to its removal.
–
The burner surface and boiler body are marked in colour
(arrows) and may only be assembled where they match.
–
Pay attention to the stipulated tightening torque
(see chapter 12.3).
Ɣ
Check the gas line for leakage.
Ɣ
Start the burner. Check for function, leakage at the burner
flange and the settings (see section 7.3.3).
1
Safety clamp
2
Mains plug, blower
3
Plug, blower controller
4
4x fixing screws (burner flange / boiler body)
5
Burner flange seal
6
Burner surface
Fig. 7-5
Removing the burner
Fig. 7-6
Installing the burner - seat of burner surface on boiler body
Содержание GCU compact
Страница 62: ...62 ROTEX GCU compact 13 x Notes 13 Notes...