Rossum Control Forge, Руководство по эксплуатации

Страница: 50 / 70

50 |
Once transfer is complete, click the encoder
to return to the
Utility menu.
Receive from Module
This function
lets you
load the
presets and
sequences
from a
Satellite or
another
Control
Forge into
your Control
Forge.
IMPORTANT!:
This function will overwrite
(i.e., delete) all of the presets and
sequences in your module.
Be careful.
To receive the data:
1. Connect the
Trigger 2 output from the
Satellite or Control Forge sending the data
to the
Logic input of your Control Forge.
2. Select Utilities > Receive from Module on
your Control Forge and click the encoder.
The display will indicate that it is waiting
for data.
3. Select Utilities > Send to Module on the
module sending the data, then click that
module’s encoder to send the data.
4. When the transfer begins, a progress bar
on your Control Forge’s display will show
its progress.
5. If an error is detected during reception
or on completion of reception, an error
message will be displayed and you can
click the encoder to try again or press the
Global/Pause/Utilities button to exit.
Once transfer is complete, click the encoder
to return to the
Utility menu.
Save User Data
This function
lets you
save all your
presets and
sequences to
an audio .wav
file for backup
or transfer
purposes.
To save your
data to a .wav
file:
1. Connect the Control Forge’s + Output to
the input of your recording device.
NOTE:
The recording device must
record uncompressed WAV data. Do
not
use an MP3 recorder.
2. Select
Utilities > Save User Data
on your
Control Forge.
3. Upon selecting Save User Data, Control
Forge will begin sending a test tone for the
purpose of setting your record level. Using
this tone, set the record level on your
recording device to -6dBFS.
4. Start recording on your recording device.
5. Click the encoder on your Control Forge
to send the data.
Once transfer is complete, stop recording on
your recording device and click the encoder
to return to the
Utility
menu.