manualshive.com logo in svg

Rossum Control Forge, Руководство по эксплуатации

Поделиться
Скачать
Rossum Control Forge Скачать руководство пользователя страница 11

| 

11 

The 

Manual Gate 

button functions 

in both Play and Program Modes 
in the same manner as the 

Gate/

Trigger

 input, allowing the 

generating of a gate for test or real-
time performance purposes. The 

button and input are logically ORed together 
to create the Gate. 

The LED in the Manual Gate pushbutton will 

In 

Play Mode,

 while Control Forge is running, 

the buttons’ LEDs light to indicate the active 
segment. No segment LED is lit when 
Control Forge is stopped.

Pressing one of the Segment Buttons (apart 
from Segment 1) while Control Forge is 
stopped causes it to immediately jump to that 
segment and to begin running from 0 Volts. 
If Segment 1 is pressed while stopped, it is 
treated as a 

Manual Gate,

 including activating 

the global Start/Reset parameters.

Pressing one of the Segment Buttons while 
Control Forge is running is treated as a 

Jump 

Immediate

 from the active segment to the 

pressed segment.

In 

Program Mode,

 the buttons are used to 

light while a gate is active, either as the result 
of a Gate/Trigger input signal or the Manual 
Gate button being pressed.

Segment Buttons

select segments for editing. The LED of the 
segment being programmed will always be 
fully lit. If Control Forge is running, the LED 
of the active segment (if it is not the segment 
being programmed) will be more dimly lit.

If Control Forge is running, pressing the 
button of the segment being edited will 
cause the generator to jump to that segment. 

During the naming portion of the 

Save Preset

 

and 

Save Sequence

 operations, the 

Segment 

Buttons 

can be used to enter alpha numeric 

characters.

Time and Level Knobs

In 

Program Mode,

 these 

knobs set the 

values of the 
associated 
parameters. 
In 

Play Mode, 

they allow 

manual real time setting of 

CV 3 

and 

CV 4 

for 

conditional jump tests. 

NOTE:

 Since both of these parameters have a 

very wide range of possible values, when 
their editing window is visible, you can 

use the encoder to fine tune your selection. 
Pressing, holding, and turning the encoder, will 
quantize the selection to useful values.

Parameter Buttons

Содержание Control Forge







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды