Rossum ASSIMIL8OR, Руководство по эксплуатации

Страница: 53 / 67

| 53
pretty much identical to the
Load Software
function above, with the exception that
you will be downloading and loading a file
entitled
“MLO.”
Format SD Card
This function
formats a
micro SD card
to be used in
Assimil8or. The
process erases
anything that
was previously
on the card, so if
you’re formatting
a card that has
anything on
it, make sure that none of that anything is
something you want to keep.
To format the card, insert the card to be
formatted and click the encoder. You’ll get an
appropriately dire waring. To proceed, turn
the encoder and click again. A progress bar
with indicate the progress of formatting. If all
goes well, you’ll get a success message.
After formatting, the card will contain an
empty folder called
“bank”
. You can use it,
rename it, or delete it as desired.
Make Boot Card
Assimil8or
includes a
second micro
SD card inserted
in the processor
board on the
rear of the
module. This
card includes
Assimil8or’s
operating
software, along
with the software required for Assimil8or to
boot up. Under most circumstances, you
should never need to access or interact with
this card. However, if you ever want or need
(for whatever reason) to have a backup boot
card, this function will allow you to create
one.
The process is exactly like the Format
SD Card process described above. After
formatting, the card will contain an
“app”
file
(the operating software) and an “MLO” file
(the boot software).
NOTE:
The app and MLO files created in
this process are the ones present on the
boot card installed in your Assimil8or. If, for
some reason, you end up installing this card
in the future, if there’s been an intervening
software update, you should update the
software using the
Load Software function
described above.
Calibrate
Your Assimil8or
is carefully
calibrated at
the factory. So,
under normal
circumstances,
you shouldn’t
have a need
to recalibrate
it. However
should abnormal
circumstances
present themselves, this function allows you
to recalibrate your Assimil8or.
Before attempting to calibrate your
Assimil8or, please carefully read Dave’s
calibration instructions in
Chapter 23 .
If you decide to proceed, select Utilities >
Calibrate on your Assimil8or and follow the
instructions on each screen.
At the end of the process, you will be able
to choose whether you want to save your
new calibration. Press the encoder to save it,
or press
UTILITY
to exit without saving the
calibration.