manualshive.com logo in svg

Rossum ASSIMIL8OR, Руководство по эксплуатации

Поделиться
Скачать
Rossum ASSIMIL8OR Скачать руководство пользователя страница 66

66 

|

 27.  Acknowledgements

A number of wonderful people generously 
provided help, advice, encouragement, 
and inspiration during the development of 
Assimil8or.

Many thanks from the Rossum Electro-Music 
team to:

Jim Aikin
Alex Anderson
Patrick Aurelio
Brad Bowden
Josh Cliffe
Richard Devine
András Eichstaedt
Nancy Enge
Reek Havok
Mihai Ionescu
Kurt Kurasaki
Mason Malvinni
William Mathewson
David Phipps
Bill Putnam Jr.
Kirk Southwell
Matt Tanner
Tyler Thompson
Ben “DivKid” Wilson

And, it goes without saying (but, as we 
always do, we’ll say it anyway), our families 
for understanding all the late nights and 
weekends spent not having fun (or doing 
chores) with them.

The following applies to portions of the binary code used in Assimil8or:
Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other 

materials provided with the distribution.
Neither the name of Texas Instruments Incorporated nor the names of its contributors may be used to endorse or promote products derived from this software without 

specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 

OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 

ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 

OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The Assimil8or Cast and Crew

CONCEPT, USER INTERFACE

Dave Rossum
Bob Bliss
Marco Alpert

HARDWARE DESIGN

Dave Rossum

SOFTWARE DESIGN

Dave Rossum
Bob Bliss

MANUAL

Marco Alpert
Nancy Enge 

PACKAGING, PANEL GRAPHICS

Nancy Enge

Содержание ASSIMIL8OR




































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды