38
|
13. Loop Mode
The
Loop Mode
button lets you turn
a channel’s loop on and off as well
as select the loop’s behavior during
the envelope’s Release phase.
NOTE:
In addition to its associated LEDs,
Loop Mode
status is also displayed on the
Envelope
screen and can be set from there as
well.
Press the
Loop Mode
button to cycle
through its settings. The choices are:
Loop Off
When neither of the
Loop Mode
button’s
LEDs are lit, the selected channel’s loop is
tuned off.
Normal Mode
When the top LED is lit, the loop is in
Normal
Mode.
In this mode, upon gate fall, the
sample remains in its loop while it decays.
Gated Mode
When the bottom LED is lit, the loop is in
Gated Mode.
In this mode, upon gate fall, the
sample will progress to its end from wherever
it is (without any subsequent looping) while
its decays.
NOTE:
If a channel is using zones, the
Loop Mode
setting affects all of the
samples in the various zones.
Содержание ASSIMIL8OR
Страница 67: ...67...
