5–6 • Adding a USB Joystick or Other USB Controller
PIVOTCam Control Panel User Guide (1.2)
19.
Tap one of the following buttons:
• Autowire Follows UI ON
If you select this option, you cannot use the controller to select and control cameras unless the PIVOTCam
Control Panel is the active DashBoard panel (in focus).
This option helps prevent accidental movement of cameras while the operator is using other DashBoard
panels or device views. It also ensures that the PIVOTCam panel is always readily available while you are
controlling cameras.
• UI Follows Selection OFF
If you select this option, you can use the controller to select and control cameras regardless of which panel
or device view is active (in focus).
This option enables you to use the PIVOTCam panel and other DashBoard panels or device views for other
tasks while you use the controller to select and control cameras.
This option is suitable for controlling PIVOTCam cameras as part of the Lightning Control System.
• UI Follows Selection ON
Use this option if you want to configure otherwise unassigned controller buttons to open DashBoard panels
and device views on demand, such as Carbonite control, or the PIVOTCam Control Panel.
If you select this option, whenever a configured controller button opens a DashBoard panel or device view,
that panel or device view becomes active (in focus). If the PIVOTCam Control Panel is active and you press
a controller button to open a different panel or a device view, the PIVOTCam Control Panel loses focus.
This option is suitable for controlling PIVOTCam cameras as part of the Lightning Control System.
20.
If there are unassigned buttons on the controller and you want to configure them to open device views or
panels, do the following:
a.
Tap the
Add Mapping
button.
A new mapping row appears in the
Selection Mapping
table.
b.
In the new mapping, set
ID
to any number, except those you configured as
Value (On)
values in previous
button mappings.
c.
Specify a
Name
for the mapping (optional).
d.
For
UI Primary Identifier
, navigate to select the panel or device view that you want DashBoard to open
whenever you press the controller button you are configuring.
Tip
: If you want to select a panel, you must open the panel’s
.grid
file so the panel appears in the
Open
Panels
list.
Tip
: Make a note of the
ID
value and which panel or device view it is intended to open.
e.
for each button you want to configure.
f.
In the
Component Tree
, within the
Input Devices
node, double-click the controller node you added.
The configuration interface for the controller appears.
g.
In the
Buttons
table, for each button you want to assign to open a panel or device view, configure settings
in the corresponding row as follows:
• In the
Name
column, specify a name the mapping for future reference (optional).
• Set
Action
to
Set Value
.
• Set
Value Off
to
-1
.
• Set
Value (On)
to the number you mapped for the desired action in step 20
• Set
Mapped OID
to
selector.selection
.
Содержание PIVOTCam
Страница 1: ...PIVOTCam Control Panel User Guide Version 1 2...
Страница 4: ......
Страница 12: ...2 4 System Setup PIVOTCam Control Panel User Guide 1 2...
Страница 52: ...5 8 Adding a USB Joystick or Other USB Controller PIVOTCam Control Panel User Guide 1 2...
