Ross PIVOTCam, Руководство пользователя

Страница: 17 / 52

PIVOTCam Control Panel User Guide (1.2) User Interface Overview • 3–5
Joystick Area
The Joystick area ( Figure 3.8 ) includes controls that co-ordinate the direction of joystick motion with the direction
of camera motion, set maximum pan and tilt speed, and set maximum speed when recalling a shot.
Figure 3.8 - Joystick Area
The Joystick area includes the following settings:
• Invert Vertical — Reverses the directions (forward/back) you must move the joystick to tilt the camera.
• Invert Horizontal — Reverses the directions (right/left) you must move the joystick to pan the camera.
• Pan/Tilt Speed — Sets the maximum camera movement speed when controlled by the joystick. The value
ranges from 4 to 24 .
• Recall Speed — Sets the maximum camera movement speed when recalling a shot. The value ranges from 4 to
24 .
Tip : Configure the Mount Mode and Image Flip settings before you configure the Invert Vertical and Invert
Horizontal settings. For more information, see “ Options Area ” on page 3–4.
Data File Area
The data file area ( Figure 3.9 ) includes controls for managing files that contain camera configuration data and shot
data.
Figure 3.9 - Data File Area
The data file area shows the name of the current data file, and includes the following buttons:
• Load — Loads a saved data file. After you load a data file, any changes you make in the control panel are
immediately saved to the data file.
• Save As — Saves all current data in a new data file. If you continue to make changes in the control panel, they
are immediately saved to the new data file.
• Create New — Creates a new, blank data file, and clears all data in the control panel. Use this option to begin a
new project.
For more information about using controls in the data file area, see “ Saving and Loading Data Files ” on page 4–4.
Done Button
The Done button closes the camera configuration interface.
If there are any unapplied changes, you are prompted to save (apply) or discard them.