manualshive.com logo in svg

Ross NK RCP-NKM, Руководство пользователя

Поделиться
Скачать
Ross NK RCP-NKM Скачать руководство пользователя страница 16

3–2 • Installation

RCP-NKM User Guide (v3.0)

Figure 3.2  

Remote control panels connected to NK Series equipment in a daisy-chain layout

To connect the remote control panel in a daisy-chain layout

1.

Install the RCP-NKM into the rack frame, then fix in place with appropriate fasteners.

2.

Connect a straight-through CAT5 Ethernet cable between a 

T-BUS

 connector on the rear of the RCP-NKM and 

a 

T-BUS

 connector on the rear of another remote control panel, an NK Series routing switcher, or an NK-IPS 

(see 

Figure 3.2

).

If required, make a similar connection between the remaining 

T-BUS

 connector on the rear panel of the 

RCP-NKM and a 

T-BUS

 connector on the rear panel of another item of NK Series equipment.

3.

Connect the 5 V 2 A power supply provided to the 

POWER

 connector on the rear panels of the RCP-NKM.

4.

Connect the cable from the power supply to a suitable AC mains supply.

The RCP-NKM is designed for installation into a standard 19" equipment rack. It has integrated rack ears, 
allowing it to be screwed in using standard screws and cage nuts.

Installing the Routing Switcher System in a Star Layout

You may connect NK Series equipment to the NK-IPS in a star layout. The items are connected via the T-BUS 
control system. If any device connected directly to the NK-IPS is disconnected, it is only the downstream devices 
that become non-operational. All other devices remain operational.

NK-IPS
Network Bridge

RCP-NKM
Remote Control Panel

RCP-NKM
Remote Control Panel

Routing Switcher

Appropriate

NK Series

power supply

T-BUS

T-BUS

T-BUS

Appropriate

NK Series

power supply

NK Series

5 V, 2 A

powersupply

NK Series

5 V, 2 A

powersupply

Содержание NK RCP-NKM

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды