5.3.2 Private Setting
This feature allows control of various items such
as STANDBY MODE, AUTO PMT OPEN, AUTO
STANDBY and STANDBY DISPLAY.
•
Standby Mode:
Two Standby modes are available NORMAL and LOW CONSUME.
The LOW CONSUME option offers a Standby Power consumption of less than 1W but
takes longer to power up out of Standby than the NORMAL setting. Using the VOL+-
buttons select your preference. You will be prompted to save your new settings on
exiting.
•
Auto PMT Open:
this feature automatically corrects changes to Audio PID information
for programmes. Default is YES (RECOMMENDED SETTING).
•
Auto Standby:
Switches the receiver into STANDBY after 3 hours of inactivity. Using
the VOL+- buttons select your preference. You will be prompted to save your new
settings on exiting. NEEDS CONFIRMATION
•
Standby Display:
Turns the CLOCK DISPLAY on or OFF when in LOW CONSUME
setting (See STANDBY MODE).
5.3.3 Local Time Setting
Here you can set TIME, DATE and other related
functions on your Receiver.
•
Time Zone:
Select Time Zone. This is an adjustable offset between GMT +12 and -12
hours. The Factory default setting is “0” which equates to GMT. Use the VOL+- buttons
to select your preference. Press Exit, then OK to save your new settings.
•
Local Date:
Select Local Date. Press OK, then using the numeric keys set the YEAR,
MONTH and DAY. Press Exit, then OK to save your new settings.
•
Local Time:
Select Local Time. Press OK, then using the numeric keys set the HH and
MM. Press Exit, then OK to save your new settings.
•
Summer Time:
Select Summer Time. Choose between ON or OFF. ON increments the
System Clock by 1 Hour. Use the VOL+- buttons to select your preference. Press Exit,
then OK to save your new settings.
•
Date Format:
Using the VOL+- buttons select your preference. You will be prompted
to save your new settings on exiting. Use the VOL+- buttons to select your preference.
Press Exit, then OK to save your new settings.
•
Local System Clock:
Select Local System Clock. Choose between ON or OFF. When
set to OFF (RECOMMENDED SETTING) the time and date is automatically set from
the received Satellite signal. Use the VOL+- buttons to select your preference. Press
Exit, then OK to save your new settings.
NOTE: If you set the Local System Clock to ON then you will not be able to
adjust the LOCAL DATE and LOCAL TIME.
13
