4.2.4 Check Satellite Signal Reception
•
Press the Menu Button on the Remote Control and the installation menu will be displayed.
•
Press OK to enter the >Installation menu, then Select Antenna Setting and press OK.
•
Please note that ASTRA 2A/B/D and Eurobird 1
satellites are labelled 4.ASTRA/EURO1.
•
Your Receiver has a large number of the available
Satellites already programmed into it to make setting
up easier for you. You can see the Satellite name at
the top right of the OSD (On-Screen Display).
•
Using the VOL+/- Button select the SATELLITE you
are aligning your dish to. The default Is already set
to 4.ASTRA / EUROBIRD 1 which is the Satellite
providing the most common Free to Air English
language channels such as BBC 1 ,2, etc..
NOTE: DO NOT change any of the other settings on the Antenna Setting Menu, these
have already been programmed into your receiver during manufacture at the Factory.
•
Now refer back to your
“Satellite Dish
Installation Guide”
to fine tune your
signal reception.
•
Use the signal level indicators as
displayed in the two bars (PIC1= Strength
PIC2=Quality) towards the bottom of the
Antenna Setting Menu to help fine tune
reception (try to obtain better than 50%
for both).
4.2.5 Fast Channel Set-Up Astra 2A/B/D/Eurobird 1
The HD Satellite Receiver is pre-programmed with the most popular English Language
channels from the Astra2A/B/D and Eurobird 1 Satellites, so there is no need to scan these
channels. Simply press the Exit button twice to come out of the >Antenna Setting menu
screen, then the Red SAT or OK buttons to go into the channel list. All channels should now
be available.
4.2.6 Chosen Satellite Scan
Should you wish to obtain channels from a satellite other than Astra2A/B/D and Eurobird
1, follow 4.2.4 to check your chosen satellite signal reception strength, then press the RED
(Scan) button to scan for channels from your chosen satellite.
For full details on available scanning options go to section 5.1.2
•
Your receiver will now scan for all available programmes on your selected Satellite.
This may take several minutes.
•
When the Scan has completed, the Programmes will be saved automatically.
•
Press EXIT to leave the Installation Menu
•
You can now enjoy all the available Programmes on your chosen Satellite.
8
Pic.1
Pic.2
