Ross HDC-8222A, Руководство пользователя

Страница: 28 / 52

4–2 • Menus HDC-8222A User Manual (Iss. 02)
DashBoard Menus for the HDC-8222A
This section briefly summarizes the menus, items, and parameters available from the DashBoard
Control System™ for the HDC-8222A. Parameters marked with an asterisk (*) are the factory
default values. The DashBoard Control System™ enables you to monitor and control openGear
frames and cards from a computer. DashBoard communicates with other cards in the DFR-8300
series frame through the MFC-8300 Series Network Controller Card.
Card Info Tab
The Card Info tab provides read-only information such as software revision issue, signal status,
and power consumption of the HDC-8222A. Table 4.1 summarizes the read-only information
displayed in the Card Info tab.
Table 4.1 Card Info Tab Items
Tab Title Item Parameters Description
Card Info
(Read-only)
Product HDC-8222A
Manufacturer Ross Video Ltd.
Input Format # Reports the current input format
Equalizer # Reports any detected bit errors
Temperature ##.##°C / ###.#°F Current temperature of card at scalar IC
+12 Rail Current ### mA Supply current
Power #.# W Current power consumption of card
Software Release
Number
#
Indicates the software release version
currently installed on the card
Software Build
Number
#
Indicates the build number currently
installed on the card
S3 and S4 Rotary Edge Switch
Reports which parameter is selected by
the
S3 and S4 rotary switches
Remote Software Switch S1-1
Reports if remote software is enabled or
disabled (how
S1-1 is set).
When enabled remote software can
modify card parameters. (
S1-1 is set to
ON ).
When disabled, card parameters can only
be changed through the card-edge
switches. (
S1-1 is set to OFF ).