3–6 • User Controls
HDC-8222A User Manual (Iss. 02)
Adjusting Menu Parameters on the Card-edge
When adjusting the parameters with the rotary switches
S3
and
S4
, the three LEDs on the front
card-edge report the value of the setting. While viewing the card in its vertical position in the
frame:
• at the start of a numerical report, all the LEDs blink simultaneously
• the
POWER
(top) LED blinks the number of 100s
• the
LOCK STATUS
(middle) LED blinks the number of 10s
• the
INPUT STANDARD
(bottom) LED blinks the number of 1s. Note that for
parameters that have only an ON/OFF state, the
INPUT STANDARD
LED blinks
accordingly.
For example, the card is reporting a value of
275
. The sequence is as follows:
1.
A blink of all LEDs
2.
Two blinks of the
POWER
LED
3.
Seven blinks of the
LOCK STATUS
LED
4.
Five blinks of the
INPUT STANDARD
LED
5.
Repeat
LOCK
STATUS
a
Green
When lit green, this LED indicates an HD lock.
Flashing
When flashing, this LED indicates that there is no signal present.
Orange
When lit orange, this LED indicates an SD lock.
INPUT
STANDARD
a
Green
When lit green, this LED indicates an input standard of 1080.
Yellow
When lit yellow, this LED indicates an input standard of 720.
Off
When unlit, this LED indicates the presence of an SD signal.
a.
When the card is operating in Normal mode (
S3
and
S4
are set to
00
).
Table 3.2 LEDs on the HDC-8222A
LED
Color
Display and Description
Содержание HDC-8222A
