Ross ACO-2200, Руководство пользователя

Страница: 28 / 42

28 • DashBoard Menus ACO-2200 User Guide (v5.0)
Temperature Tab
The Temperature tab provides information on the temperature sensors within the ACO-2200. A typical example
might look like:
+3v3 Regulator 42 45 41
Depending on the exact configuration and options in the ACO-2200, only those sensors that are detected will be
displayed. If a sensor is installed but has failed, the description in the relevant line appears as:
N+1 Interface
-Sensor absent
.
Status Tab
The Status tab provides a full status report of the ACO-2200. The following status information is provided:
• Number of operational channels
• Changeover mode
• On-Air status
• Recovery mode
• Individual Channel Status for both Primary and Backup Channels
PSU Status Tab
The PSU Status tab, located on the right side of the Slot 0 - ACO-2200 interface in DashBoard, displays read-only
values for the number of times each power supply has been cycled, and the running hours count.
EventGPSTimeLost 7 EventNewMinTemp0 34
EventSetUTCTimeFromNTP 8 EventNewMinTemp1 35
EventNTPTimeLost 9 EventNewMinTemp2 36
EventLeftPSUfail 10 EventNewMinTemp3 37
EventLeftPSUreturn 11 EventNewMinTemp4 38
EventRightPSUfail 12 EventNewMinTemp5 39
EventRightPSUreturn 13 EventNewMinTemp6 40
EventPSULCDCancelManual 14 EventNewMinTemp7 41
EventPSULCDCancelAuto 15 EventNewMinTempAlarm0 42
EventPSULCDRepeatManual 16 EventNewMinTempAlarm1 43
EventPSULCDRepeatAuto 17 EventNewMinTempAlarm2 44
EventNewMaxTemp0 18 EventNewMinTempAlarm3 45
EventNewMaxTemp1 19 EventNewMinTempAlarm4 46
EventNewMaxTemp2 20 EventNewMinTempAlarm5 47
EventNewMaxTemp3 21 EventNewMinTempAlarm6 48
EventNewMaxTemp4 22 EventNewMinTempAlarm7 49
EventNewMaxTemp5 23 EventEthernetLinkMade 50
EventNewMaxTemp6 24 EventEthernetLinkLost 51
EventNewMaxTemp7 25 EventGPSSetTimecodeFromGPSFlag 52
EventNewMaxTempAlarm0 26 EventGPSUnSetTimecodeFromGPSFlag 53
Table 7.1 Recordable Events
Event Code Event Code