Ross ACO-2200, Руководство пользователя

Страница: 30 / 42

30 • DashBoard Menus ACO-2200 User Guide (v5.0)
Channels 1-6 Tab
Slot 16 - System Setup Tabs
Select the Slot 16 - System Setup node to view the operational status of the ACO-2200, configure and monitor
Network settings and status. It is also possible to view the factory Calibration settings.
Table 7.2 Configuration Items
Item Parameter Notes
No of Channels # Use this menu to specify the number of channels
they want the ACO-2200 to monitor
Changeover Mode Automatic Allows the ACO-2200 to select primary or backup
Manual Allows the user to force the ACO-2200 to stay
with either the primary or backup
On Air # This read-only field indicates whether the primary
or backup is currently on air
Auto Recover Settings
Recover Mode Stay in backup mode The ACO-2200 goes into manual mode with the
backup routed to outputs.
Automatically recover after
the primary fault is fixed -
immediately This mode returns to the primary as soon as the
ACO-2200 sees the primary signals have returned.
Automatic recover after
Primary fault is fixed - after
delay is finished This mode allows the user to set a time in seconds
to delay the return to the primary SRG-2200. This
can be set from 0 - 86399.
Recovery Delay HH:MM:SS Specifies how much time optional recovery delay
is set for
Recovery Delay
Countdown HH:MM:SS Specifies the running time until the ACO-2200
switches the primary SRG-2200 to air
Table 7.3 Configuration Items
Item Parameter Notes
Signal Type Selects the type of signal that the specified channel
is to measure
Primary Signal # Shows a relative signal amplitude and red or green
for fault or no fault condition for the primary
SRG-2200
Primary Health #
Backup Signal # Shows a relative signal amplitude and red or green
for fault or no fault condition for the backup
SRG-2200
Backup Health
Warning
— Do not attempt to change these without factory guidance or assistance.