Ross 4500DR-204-03, Руководство пользователя

Страница: 40 / 70

40 • Front Panel Menu System ACO-4500 User Guide (v3.0)
Figure 7.7 System Setup Menu Example
The System Setup menu provides a gateway to the less frequently used options in the ACO-4500.
These options include:
• Extended information in the form of reports, Extended configuration options,
• Access to factory settings that the user should never have to access or adjust, but may contain useful information
to communicate to the factory during a service event.

Reports contain information only; there are no editable fields in these menus.
Temperature Reports
The Temperature Report appears below (general form).
Figure 7.8 Temperature Reports Menu Example
The Temperature Report provides information on the temperature sensors within the ACO-4500. A typical example
might look like: “
+3v3 Regulator 42 45 41
“
Depending on the exact configuration and options in the ACO-4500, one or more of the sensors might not be
installed. In this case, the description in the relevant line appears as seen in
Figure 7.8 . These menu lines report the
power cycle counts and “in service” times for both of the PSUs installed in the N+1 Dual Redundant PSU
ACO-4500.
Because the temperature report includes not only the current temperatures and both the minimum and maximum
temperatures detected by the installed temperature sensors, but also power supply “in-service” data, this
information might be useful if you are experiencing reliability problems in an extreme environment.
Event Report
The Event Report appears below (example form).
— Network —> Menu Enter
— Calibration
—>
Menu Enter
— Configuration —> Menu Enter
— System Report —> Menu Enter
— Event Report —> Menu Enter
— Temp Report Menu Enter —>
L PSU on for hhhhh.ddd hours
+3v3 Regulatory
L PSU turned on nnnnn times
N+1 Interface
R PSU on for
hhhhh.ddd hours
R PSU turned on nnnnn times
42 45 41