manualshive.com logo in svg

Ross 4500DR-204-03, Руководство пользователя

Поделиться
Скачать
Ross 4500DR-204-03 Скачать руководство пользователя страница 15

ACO-4500 User Guide (v3.0)

Hardware Overview • 15

Hardware Overview

This chapter presents information on the ACO-4500 front and rear panels. 

Front Panel Overview

This section summarizes the controls and indicators located on the ACO-4500 front panel.

Figure 3.1  ACO-4500 — Front Panel Components 

1. LCD Display

The dot-matrix LCD display is used to show system status, fault indications, and general in-use information, as 
well as being used to configure the menu system items.

2. Back Button

The Back push-button is used to exit the current menu screen, and to traverse back through the menus, ultimately 
to the stand-by screen.

Pressing the dedicated push-button once will exit the current menu level. When you have finished editing the 
menu options, you should use the dedicated push-button to exit the menu system completely. You need to press 
the button a suitable number of times to get back to the stand-by screen (the one with the Ross Video logo, one 
press back from the top level menu). This will save any changes that you have made to the non-volatile memory.

3.  Rotary/Push Control Knob

The Rotary / Push control has two functions:

› the rotary function is used to navigate up or down items in a menu, or to cycle through a range of values 

relating to a menu item,

› the push function is used to confirm a menu item selection for editing, to exit menu item editing, or take you 

“forward” to the next menu item.

Selecting or editing menu items requires you to turn the Rotary Control in order to select or change the 
highlighted menu item / setting, then to press the Rotary Control to select or confirm that menu item / setting. 
Pressing the Rotary Control will select the highlighted menu item for editing, exit menu item editing, or take you 
to the next menu level. Note that there may be more menu lines available than can be displayed on the LCD 
screen; be sure to scroll down (or up) to find the required entry.

4. Removable Power Supplies (not shown)

There are two Removable Power Supply assemblies, installed and secured into the front of the ACO-4500, either 
side of the LCD display. These supplies can be removed or inserted while mains power is still present. Should it 
become necessary to replace one or both of the Removable Power Supply assemblies, the instrument does not 
have to be removed from the rack.

Rear Panel Overview

This section outlines the ACO-4500 rear panel connectors.

2

3

1

ACO-4500

CHANGEOVER

Содержание 4500DR-204-03







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды