Rosemor Rotomac 360 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 23

Rosemor Rotomac 360 Скачать руководство пользователя страница 6

Automatic Escalator Deep Cleaning Machine – Rotomac 360

Created by Rosemor International Ltd

Page 6

1.10 Warning signs and stickers

1.11 Product Liability

The operator is expressly notified that the
machine must be used only for the intended
purpose. If the machine is not used for the
intended purpose, such use will be at the sole
risk and responsibility of the user. Rosemor
International Ltd will not accept any liability in
such cases.

1.12 Emissions

The A-assessed equivalent continuous sound
level of this machine measures 78 ± 2 dB (A).

1.13 Sources of Danger

If the operator on the escalator wishes to leave
machine, he must lower the machine, i.e. let the
machine rest on the glide strip. The machine
must then be moved in this lowered position with
the escalator to the bottom end of the escalator.

1.14 Procedure in case of emergency

Lower machine, turn key switch (10) to “0” and
remove key.

Markings, warning signs and
stickers may never be
removed!
Damaged or illegible warning
signs and stickers must be
replaced or repaired
immediately!

The machine may not be left
unattended and unlocked on the
escalator. All safety instructions
and regulations applicable to the
escalator being cleaned must be
strictly observed.

«
...
4
5
6
7
8
...
»

Содержание Rotomac 360
























Отзывы:

Нет отзывов