Rosemor Rotomac 360 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 23

Rosemor Rotomac 360 Скачать руководство пользователя страница 16

Automatic Escalator Deep Cleaning Machine – Rotomac 360

Created by Rosemor International Ltd

Page 16

After the cable has been connected once more,
the procedure described above can be started a
new and the escalator cleaned again up to the
top completely extended step. After the machine
has been run from the lower to the highest
completely extended step, one side of the
escalator will have been cleaned.

The machine must now be shifted from the left
to the right or vice versa (Fig. 13: Shifting
machine).

Fig. 13: Shifting machine

The cleaning process can then be started for the
right or left side and take place as described
above.

3.12 Subsequent cleaning

Manual cleaning equipment has been developed
by Rosemor International Ltd by means of
comprehensive practical tests.

With this equipment, any subsequent cleaning
that may become necessary, such as major
soiling on the edges and the joining areas
between two steps, can be carried out easily.

3.13 Refilling with fresh water

The operator must carry out regular checks at
the transparent feeder tube for fresh water (29)
to ensure that the machine is receiving a supply
of detergent solution. If bubbles appear in the
tube or if no liquid can be seen, the fresh-water
tank is empty and must be refilled. Let the
machine stand in the lowered position on the
escalator and fill fresh water along with cleaning
agent according to instructions in Section 3.3

3.14 Emptying the dirty-water tanks

(see Fig. 14: Remove dirty-water tank and
Fig.15: Insert dirty-water tank)

•

Set key switch (10) to "0" position

•

Draw the dirty-water tank (2) forward
and set down onto shaft (13)

•

Remove tank lid (1) with suction tubes
and let hang to the side

•

Grip tank on the carrying-troughs and
dispose of dirty water according to the
relevant environment regulations

•

Place dirty-water tank (2) onto shaft (13)
and insertion area

•

Replace tank cover (1)

•

Place in tank (2) and check secure
mounting

•

Set key switch (10) to position "1"

•

Start suction with START/STOP key (5)

•

Check fitting of tank cover!

•

Switch off suction with START/STOP
key (5)

•

The work can now be continued

All valid regulations
regarding waste water must
be strictly observed when
the dirty water is being
dumped!

When the fresh-water tank is
being filled it is essential that
the dirty-water tank is
emptied

The manual cleaning
equipment manufactured by
Rosemor International Ltd is
particularly suitable for minor
subsequent cleaning.

«
...
14
15
16
17
18
...
»

Содержание Rotomac 360
























Отзывы:

Нет отзывов