manualshive.com logo in svg

Rose electronics RP2-1R2X16U, Инструкция по установке и эксплуатации

Поделиться
Скачать
Rose electronics RP2-1R2X16U Скачать руководство пользователя страница 54

 

 

ULTRAMATRIX REMOTE INSTALLATION AND OPERATIONS MANUAL

  

48 

Scrolled view 

The scrolled view displays the image from the remote computer with its original size.  If the Viewer’s display area is 
smaller than the computer’s video, vertical and horizontal scroll bars are added.  If the Viewer’s display area is larger 
than the computer’s video, the Viewer centers the computer’s video. 

Scaled view   

In the scaled view mode, the Viewer sizes the computers video to fit the Viewer’s display area.  To scale an image, 
adjust the size of the Viewer window by dragging the window edges to the size needed.  The “Don’t Enlarge” sub-
option, when checked, displays scaled-down images when the image is larger than the display area but centers the 
image, with no scaling, when the image is smaller than the display area. 

Auto Size 

Checking “Auto Size” causes the Viewer to resize when there is a change in the image size.  The image size may 
change when switching between CPU ports on a KVM switch or when a remote computer boots. When possible, the 
Viewer will adjust the window to match the original image size. 

Single 

Selecting “Single” will toggle the display area from the Quad screen view to a single view.  When switching from a 
Quad view to a Single view, the image in quadrant 1 is displayed. 

Quad 

Selecting “Quad” will change a Single view to a Quad screen view. 
 
Note: Single and Quad views are only available if the UltraMatrix Remote is configured to a KVM switch. These 
options are not available when configured for a Standalone PC. 

Color 

When selected, the image in the Viewer matches the original image on the remote computer. 

Gray 

When selected, the image in the Viewer is converted to grayscale. 

Black and White 

When selected, the image in the Viewer is converted to Black and White. 
 
Below shows the relationship between the different modes, the image quality, and transmission speed. 
If the computer’s image is mostly solid colors, reducing the color quality will have little effect on the transmission 
speed.  If the images contain gradients or complex graphics, the speed increase may be dramatic. 
 
 

Mode 

Image Quality 

Speed 

Color 

High 

Low 

Gray 

Medium 

Medium 

Black and White 

Low 

High 

Содержание RP2-1R2X16U





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды