- 4 -
• Use of any fluid other than Rosco fog fluids or modification or attempted unauthorized repair
of the machine will immediately invalidate the warranty.
• Machines are designed for continuous use over an 8-hour day, but to protect components, it is wise to
turn off the machine when it is not in use. In permanent installations, it is advisable to equip the
circuit with a night cut-off device.
Additional Precautions: Do’s & Don’ts
• Do Read the entire manual before operating the machine and pay particular attention to all
CAUTIONS AND WARNINGS.
• Do Use an extension cord that is properly rated for voltage, current and length, and is free from
nicks, cuts or other signs of wear.
• Do Check to see that the machine is clean and free of foreign objects before each operating period.
• Do Ensure that the machine is adequately ventilated.
• Do Use proper caution when handling hot surfaces.
• Do Use the minimum amount of haze required to achieve the desired effect.
• Do Not Use the machine near a person who has asthma or similar inhalation disorder.
• Do Not Use any foreign substances in the machine.
• Do Not Use a machine that is damaged or operating improperly in any way.
• Do Not Use a machine that leaks fluid from the housing.
• Do Not Leave the machine switched on for prolonged periods of time without producing haze.
• Do Not Enclose the machine.
• Do Not Install the machine in such a fashion that the operator cannot see the whole machine,
including the indicator lights.
• Do Not Touch the shielded nozzle of the machine. Allow sufficient cooling time after operation
before attempting to perform maintenance or storage.
• Do Not Direct the haze output continuously against nearby surfaces. This may eventually cause
fluid to re-condense.
Danger! Hazardous
voltage. Contact will
cause electric shock.
Caution! Safety
hazard. Risk of
personal injury.
Caution! Burn
hazard. Hot surface.
Do not touch
Caution! Fire hazard.
Danger! Hazardous
voltage. Contact will
cause electric shock.
Caution! Safety
hazard. Risk of
personal injury.
Caution! Burn
hazard. Hot surface.
Do not touch
Caution! Fire hazard.
Safety Precautions
• In any facility, the fog concentration should be controlled. The fog should never
mask emergency exits, safety signs, staircases or other safety constructions.
• After long use, or if the machine is not properly set, some liquid droplets or wet area
may appear in front of the machine’s outlet. This liquid should be wiped up to
prevent a condition where someone might slip and fall.
Preventing Improper Operation
• Unauthorized repair or alteration of any safety devices can lead to improper operation
and accidents. Repairs should be performed only by an authorized Service Center.
