Rosco Pica Cube, Руководство пользователя

Страница: 30 / 32

Warning Messages
30
The Pica Cube™ has warning messages built in that will instruct you when an action
needs to be taken.
On startup, if a DMX signal is not present on the DMX connectors, and the fixture is
set to DMX mode, all of the LEDS will glow dimly. This feature can be used for
troubleshooting your DMX control lines. Once DMX is detected the fixture will
instantaneously respond to the command it is given.
The Pica Cube™ is equipped with an internal temperature sensor.If an overheat
condition is experienced the Red
(4C)
,Warm
(WNC)
or
UV
LED will glow dimly and
the fault LED on the back of the fixture will turn on. If this occurs unplug the power
connector from the unit and wait three seconds. Plug the fixture in again. If the
same condition occurs again contact the manufacturer.
The Pica Cube™ can also detect a fan speed fault. If this occurs the Blue
(4C)
,
Cool (WNC) or UV LED will glow dimly and the fault LED on the back of the fixture
will turn on. If this occurs unplug the power connector from the unit and wait
three seconds. Plug the fixture in again. If the same condition occurs again contact
the manufacturer.