Rosco Pica Cube, Руководство пользователя

Страница: 19 / 32

Color Wash Mode
19
Color wash is only available in Pica Cube™ 4C. In Color Wash mode, the Pica
Cube™ automatically cycles through its entire saturated color spectrum by
modulating the intensity of the red, green, and blue LEDs.
There are two user settings that can be adjusted in Color Wash Mode - Wash
Timer and Wash Offset.
Wash Timer:
The wash timer determines how long it takes for the Pica Cube™ to complete
an entire color cycle, and by extension, the rate at which the colors change.
Choose a short time for a rapid wash or a longer time for a slower wash. To
change the Wash Timer press TOGGLE . The status LED will begin to blink slowly.
Rotate the
KNOB
to desired Color Wash speed (0 = 15s, 8 = 16.5min, F = 60min).
Once your speed is achieved, press
MODE
to save and exit.
Wash Offset:
When set to Color Wash Mode, the Pica Cube™ is operating as a DMX master
and is sending DMX512 data, allowing it to control unique color washes on up
to fourteen additional fixtures in a chain (set to DMX mode).