Rosco Pica Cube, Руководство пользователя

Страница: 23 / 32

Serial Mode
23
In Serial mode, the unit is controlled by the serial data it receives on the RJ45
connectors located on the rear panel. The serial address required to control the fixture
is dependent on the factory setting in use (for example - four color Pica Cubes™ use
four DMX Channels while one color Pica Cubes™ use one).
Serial Address
To change the Serial address while in Serial Mode press the TOGGLE button.
The Status LED will begin to blink slowly and at this time adjust the
KNOB
to set
the first digit of your address. Once you have selected the first digit press the
TOGGLE button to lock it in. The status LED will blink rapidly for a brief moment
telling you that the first digit is locked and ready for the second digit. Repeat
this step again for the second and third digits and press the TOGGLE button
upon completion.
NOTE: It is important that you inlcude leading zero’s in the first and second
digits if neccesary. Also make sure you enter a valid Serial address
(001-512)
otherwise the fixture will default to your previous address.