Rosco Pica Cube, Руководство пользователя

Страница: 21 / 32

Preset Mode
21
In Preset Mode, the Pica Cube™ can be
controlled directly from its rear panel
without the need of a DMX console or a DMX
control device. This mode is only available in
the 4C and WNC Configurations. Preset
mode allows you to tune your fixture to
various color temperatures ranging from
2700K to 6500K, or select from a set of
saturated colors.
When set to preset mode, the Pica Cube™
operates as a DMX Master and is sending
DMX512 data.(All Standalone settings, DMX
setting and configuration settings are non-volatile, meaning they will
not change if power is lost or switched off and restored.)
To change the Preset Intensity, press the
TOGGLE
button until the status LED
blinks slowly. Rotate the KNOB to desired intensity (0 = off, 8 = medium
intensity, F = high intensity). Once desired color achieved, press
MODE
to save
and exit. To change the color temperature or saturated color hold the
TOGGLE
button until the status LED blinks rapidly. Rotate the KNOB until the desired
color is selected (Use next page to see color settings). Press
MODE
to save
and exit.