Rosco Pica Cube, Руководство пользователя

Страница: 17 / 32

Manual Mode
17
In Manual Mode, the Pica Cube™ can be controlled directly from its rear panel
without the need of a DMX console or a DMX control device. Standalone control
capabilities vary according to the factory setting in use (Four Color, Three Color,
or One Color). The Pica Cube™ has a self recognizing interface, meaning you
don’t have to configure it at the possibility you changed LED boards.
(All standalone, DMX address and configuration settings are non-volatile,
meaning they will not change if power is lost or switched off and restored. When
set to manual mode, the Pica Cube™ operates as a DMX Master and is sending
DMX512 data.)
NOTE: Do not connect any Pica Cube™ in Manual Mode to any other DMX
sending device as contention on the DMX512 input will result.