Ros ROS3001, Руководство по установке

Страница: 15 / 46

15
Copyright 2013 Prodea Systems
12. Setup Phone Service
Your Home Center gives you another phone line. Let’s set that up.
1. Plug one power cord into the Gigaset Phone’s Base Station and then into
a power outlet.
2. Plug the other power cord into the Handset Cradle and then into a power
outlet.
3. Place the Handset in the Cradle and let it charge overnight.
4. Connect the Base Station to the Home Center’s Ethernet LAN port.
5. Pair the Handset with the Base Station:
a. On the Handset, choose Menu > Settings > Register > Register Handset.
b. Enter passcode 0000. Do not change this passcode. It must be 0000 to
work with your ROS voice service.
c. Select OK.
d. Press and hold the blue button on the base station for 5 seconds. Repeat
pressing the blue button if it doesn’t work the first time.
The Home Center will automatically configure the Gigaset Phone. A test ring
on the phone means the Handset is connected to the Base Station. When it
rings again a minute or two later, you can use it.
13. Connect to PC
You can connect to your Home Center using a PC browser.
1. Type the Home Center ID you received from your Service Provider into
the browser’s address window, and you’ll see a log-in page.
2. Under Username, type your account name or username.
3. The Account Password is either the default — admin — or the new
Account Password you created. Haven’t created one? Do it now. You
have to replace the default Account Password with your own to activate
Remote access. See page 12 - SET YOUR PASSWORD for instructions.