14
Copyright 2013 Prodea Systems
11. Home Monitoring and Netcam Connection
Before you begin:
DON’T follow the instructions provided with the Netcam, because they may
interfere with your ROS Home Monitoring service.
DO use the Netcam’s documentation for hardware installation and
description, and as a guide to the Netcam’s LEDs.
Set Up Your Netcam
1. Connect your Netcam to its power supply, and plug that into a power
outlet.
2. Connect your Netcam to the Home Center using WiFi.
3. Connect the Netcam to the Home Center by pressing the WPS buttons on
both the Netcam and the Home Center’s rear panel.
4. Wait to see the “Device Configured” notification on your TV.
5. On your TV, go to My Home and choose ROS Sec to check the Netcam
video feed.
If necessary, your Home Center will automatically update the Netcam. Follow
the instructions shown on your TV for this process. DON’T disconnect or
unplug the Netcam until the update is complete. Doing so may make it
unusable.
Содержание ROS3001
Страница 1: ...1 Copyright 2013 Prodea Systems ...