Galaxy GHDX4 RAID iSCSI-SAS/SATA InstaHardware Reference Manual
76
DIMM Module Installation
WARNING!
The pre-installed modules must be removed prior to installing new modules.
Do this with care. Sensitive components can be damaged during the process.
Step1.
Prepare an anti-static work pad or container
for placing a
removed module. Use of an ESD grounding strap is highly
recommended.
Step 2
.
Remove the controller module
.
Step 3.
Remove the previously installed DIMM module
from the
DIMM socket. To do this, push the white clips on either side
of the DIMM socket down. By doing this, the DIMM will be
ejected from the DIMM socket.
Step 4
.
Wait one (1) minute for the remaining electricity
on the
main board to disperse. Remove the faulty module from the
DIMM socket. To do this, push down the white module clips
on either side of the DIMM socket. The DIMM will be ejected
from the DIMM socket
Replacing a DIMM Module
Step 5
. Insert the replacement module into the DIMM socket. Make
sure the white clips of the DIMM socket are in the open
positions. Align the DIMM module with the DIMM socket by
checking its “keyed” position. Once aligned, gently and firmly
push the DIMM module into the socket. The white clips on the
sides of the socket will close automatically and secure the
DIMM module into the socket.
Step 6.
Reinstall the controller module. After the DIMM module has
been properly installed, install the RAID controller. To do this,
align the controller module with the controller module bay.
Then gently push the controller module into the controller
