Page 6
5.1
Tips og tricks
5.1.1 Tension in upper bolts of Flexi frames
5.1.2 Determine the difference between a MANUEL and Electric Flexi Leg.
3
5
cm
62 cm
150 Kg
Upper mounting
holes (2pcs./leg)
Calculation has been done for ONE leg, which will be
worst case. Worktop 62 cm deep.
Max. Permissible load at the Flexi frame is 150 Kg,
evenly distributed. In this example we have put the max.
Load in the front of the worktop.
150 x 62
Tension upper bolts:
35 x 2
= 133 Kg/bolt
Safety factor must be used:
Safety factor 1
133 Kg/bolt
Safety factor 2
266 Kg/bolt
Safety factor 3
399 Kg/bolt
Under normal circumstances the load will be distributed
to the two legs (4 bolts)
Flexi leg seen from the front:
By looking thru the small hole, you will face following
colour combinations:
Black shall always be seen to the right hand side!
Red / black
Elektric Flexi Leg with fast spindles
Green / black
Manuel Flexi Leg with slow spindles
Green / black
Manuel Flexi Leg, which might be retrofitted to an
Flexi electric, running with a slow.
This is very important information to make a visual
verification of the exact Flexi model.
