manualshive.com logo in svg

Ronde & Schwarz GP-E, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz GP-E Скачать руководство пользователя страница 74

User Interface

R&S

®

GP-U/GP-E/GP-S/GP-T

74

User Manual 3646.3836.02 ─ 01

Field

Description

"MAC Address"/"IP
Address"/"Host Name"

Specify a static IP address for a host in the network by entering the host's MAC
address and IP address. Aditionally, you can enter the host name. Click "Add"
to add the static IP address to the list.

You can edit or delete each single entry in the list by clicking the appropriate
button next to an entry. For further information, see 

Chapter 3.2, "Icons and

Buttons"

, 

on page 17.

Note:

 If you edit an entry, a check mark appears on the right of the entry. Click

the check mark to apply your changes.

"Add from ARP Cache"

From the drop-down list, select the addresses you want to add from the ARP
cache.

Click "OK" to save the interface settings and return to the "DHCP Settings" settings
panel.

DHCP Relay Settings

A DHCP relay redirects incoming requests to a DHCP server to another network
because DHCP requests cannot be routed.

Field

Description

"DHCP Server IP
Address"

Enter the IP address of the server to which the DHCP requests will be redirec-
ted.

"Relay through these
interfaces"

Select one or more interfaces from which DHCP requests will be forwarded.
Also select the interface that the DHCP server is connected to.

The buttons at the bottom right of the editor panel allow you to shut ("Close") the editor
panel as long as no changes have been made and to store ("Save") or to discard
("Reset") your changes.

Click "  Activate" in the toolbar at the top of the desktop to apply your configuration
changes.

3.4.3 WAN

The "  WAN" settings allow you to set up the WAN access of your gateprotect Firewall
by configuring DNS settings, DynDNS accounts, and QoS settings.

3.4.3.1

DNS Settings

Navigate to "WAN > DNS Settings" to configure the DNS settings of your gateprotect
Firewall.

Usually, the DNS server settings are provided by the WAN connection. You should
have to configure the DNS server settings only if you cannot obtain them via the WAN
connection.

 

 

Menu Reference

Содержание GP-E


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды