manualshive.com logo in svg

Ronde & Schwarz GP-E, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz GP-E Скачать руководство пользователя страница 120

User Interface

R&S

®

GP-U/GP-E/GP-S/GP-T

120

User Manual 3646.3836.02 ─ 01

based information exchange are the SNMP manager (e.g. Nagios) and the SNMP cli-
ents (devices such as your gateprotect Firewall that are meant to be monitored by the
SNMP manager).

While the SNMP manager requests, receives and monitors information, the SNMP cli-
ents respond to information requests (e.g. "What is the current CPU load/memory
usage of the device?"). Status information offered by managed devices is organized
like a tree (the so-called Management Information Base, short 

MIB

), with each leaf

being a retrievable piece of information. Every single leave can be addressed and
requested individually via its own unique numeric address. A file containing a mapping
of these numeric address snippets to meaningful names, and thereby a declaration of
all information available on a managed device, can be provided to the SNMP manager
to increase human usability (e.g. 

29577.1.1

 represents

RSCS.SystemLoad.cpuLoad

).

The "SNMP Settings" allow you to configure the following elements:

Field

Description

"ON"/"OFF"

A slider switch indicates whether SNMP is active ("ON") or inactive ("OFF"). By
clicking the slider switch, you can toggle the state individually. SNMP is deacti-
vated by default.

"Listening IP"

Optional: Enter a local IP address on which the service will be listening. If you
retain the pre-defined default IP address 

0.0.0.0

, requests will be accepted

on all IP addresses.

"Listening Port"

Optional: Specify the port number on which the service will be listening. Port
number 

161

 is pre-defined by default.

"Protocol Version"

From the drop-down list, select the version of the SNMP protocol to be used.
Depending on the version selected, additional options become available. Ver-
sion 

v2c

 is pre-selected by default.

"Community String"

Only available if the selected "Protocol Version" is 

v2c

: Enter the pre-shared

key that every SNMP manager/client has to use to authenticate to the SNMP
service of the access zone.

"Show Community
String"

Optional and only available if the selected "Protocol Version" is 

v2c

: Select this

checkbox to verify the pre-shared key.

"Username"

Only available if the selected "Protocol Version" is 

v3

: Enter the username that

every SNMP manager/client software has to use to identify to the SNMP ser-
vice of the access zone.

Note:

 The username is created and used by the SNMP service internally.

"Authentication Protocol"

Only available if the selected "Protocol Version" is 

v3

: From the drop-down list,

select the hashing algorithm that is used for authentication purposes. You can
choose between the settings 

No Authentication

, 

MD5

 and 

SHA

.

"Authentication Pass-
word"

Only available if the selected "Protocol Version" is 

v3

 and the selected "Authen-

tication Protocol" is 

MD5

 or 

SHA

: Enter the password to be used for authentica-

tion. The password must consist of at least eight characters.

"Show Authentication
Password"

Optional and only available if the selected "Protocol Version" is 

v3

 and the

selected "Authentication Protocol" is 

MD5

 or 

SHA

: Select this checkbox to verify

the authentication password.

Menu Reference

Содержание GP-E


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды