17
Non-stick coating
The baking plates are equipped with a high quality non-stick coating. The coating is easy to clean
and prevents food from sticking onto the surfaces.
ATTENTION: Do not scratch or cut on the surface of the baking plates. Never
use cooking utensils made of metal as those might damage the non-stick
coating. Scratched baking plates are not covered by the terms of warranty.
Please also refer to the cleaning notes in this manual.
How to operate your appliance
1.) Switching on
Connect the pancake maker to the mains. It is now in standby mode, the LED display shows
.
Press the
Start/Cancel
button. The appliance switches to heating mode. An acoustic
signal sounds and the red
POWER
pilot lamp lights up. The LED display shows the
heating process with ascending bars.
Note:
Always heat up the appliance with lid closed. This saves energy.
While the appliance is heating up, provide the pancake dough.
Two short signal tones indicate that the operating temperature has been reached. The red
POWER
as
well as the green
READY
pilot lamp light up.
fl ashes in the display.
2.) Select baking time
The baking time is preset to 3.0 minutes. If you want a shorter or longer running
time, you can shorten or lengthen it with the
-
or
+
button in steps of 30 seconds
(from 10 minutes running time in steps of 1 minute). The fl ashing display changes
accordingly, e.g. in
or
. Maximum baking time: 15 minutes.
In this mode, the red
POWER
pilot lamp lights up continuously and the green
READY
pilot lamp
lights up depending on the plate temperature. Press the locking button on the top of the lid
and open the appliance. Fill pankace dough into the moulds of the lower baking plate. The total
volume of dough should not exceed the rim of the bottom cooking well. Close the lid. The lock
engages audibly.
Note
: Doughs containing baking powder or baking soda will rise during baking! Therefore,
try the preparation with a smaller amount of dough fi rst to prevent the dough from leaking.
CAUTION!
The baking plates are hot! Risk of burns!
Note:
If no further input is made within 30 seconds, the unit switches to
readyness mode
.
and
fl ash alternately in the display. The appliance remains heated for 20 minutes. Press
any button briefl y to return to the time setting.
