18
Introduction
GB
We are pleased you decided in favour of this versatile baking & grilling oven with rotisserie &
circulating air and would like to thank you for your confi dence. Its easy operation and wide range
of applications will certainly fi ll you with enthusiasm as well. To make sure you can enjoy using
this appliance for a long time, please read the following notes carefully and observe them. Keep this
instruction manual safely. Hand out all documents to third persons when passing on the appliance.
Thank you very much.
Intended use
The appliance is designed for use in the household and similar areas, like for example:
- staff kitchens in shops, offi ces and other small commercial areas,
- agricultural holdings,
- by guests in hotels, motels, breakfast pensions and further similar living environments.
Other uses or modifi cations of the appliance are not intended and may constitute considerable risks of
accident. For damage arising from any improper use, the manufacturer does not assume liability.
The appliance is designed for preparing dishes. It is qualifi ed for cooking, baking, roasting, defrosting,
crisping up, rewarming, melting, gratinating and grilling food. The appliance is not designed for
commercial use.
Technical data
Only connect the appliance to an isolated ground receptacle installed according to regulations. The rated
voltage must comply with the details on the rating label. Only connect to alternating current!
BGS 1400
BGS 1500
Nominal voltage:
230 V ~ 50-60 Hz
230 V ~ 50-60 Hz
Nominal power:
1380 W
1500 W
Protection class:
I
I
Volume oven chamber:
ca. 22 litres
ca. 30 litres
Timer:
60 minutes
120 minutes
Scope of supply
Check the scope of supply for completeness as well as the soundness of the product and all components
(see product description page 2) immediately after unpacking.
Packing material
Do not simply throw the packing material away but recycle it.
Deliver paper, cardboard and corrugated cardboard packing to collecting facilities.
Also put plastic packing material and foils into the intended collecting basins.
In the examples for the plastic marking PE stands for
polyethylene, the code fi gure 02 for PE-HD,
04 for PE-LD, PP for polypropylene, PS for polystyrene
