Roller Akku-Disc 100 22 V, Инструкция по эксплуатации

Страница: 13 / 64

eng eng
1. Technical data
Use for the intended purpose
WARNING WARNING
ROLLER’S Disc 100, ROLLER’S Disc 100 RF, ROLLER’S Akku-Disc 100 22 V and ROLLER’S Disc 225 are intended for the purpose of cutting and deburring the inside ROLLER’S Akku-Disc 100 22 V ROLLER’S Akku-Disc 100 22 V
and outside of pipes.
All other uses are not for the intended purpose and are therefore prohibited.
1.1. Scope of Supply
ROLLER’S Disc 100 Basic: Pipe cutting machine, ring spanner size 27/17, instruction manual.
ROLLER’S Disc 100 RF Set: Pipe cutting machine, ring spanner size 27/17, one each of pipe guides Ø 75 mm and 110 mm, operating instructions.
ROLLER’S Akku-Disc 100 22 V Basic: Cordless pipe cutting machine, Li-Ion 21.6 V, 5.0 Ah battery, Li-Ion rapid charger, ring spanner size SW 27/17, instruction manual.
ROLLER’S Disc 225 Basic: Pipe cutting machine, ring spanner size 27/17, 2 height adjustable pipe rests 1 for pipes Ø 100 – 225 mm, Ø 4 – 8",
feed lever, spring plug, instruction manual.
1.2. Article numbers ROLLER’S Disc 100 ROLLER’S Disc 100 RF ROLLER’S Akku-Disc 100 22 V ROLLER’S Disc 225 ROLLER’S Akku-Disc 100 22 V ROLLER’S Akku-Disc 100 22 V
Pipe cutting machine 845000 845006 66 845007 845005
ROLLER’S cutting wheel Cu-INOX for pipes of the press fi tting ROLLER’S ROLLER’S
systems of stainless steel, copper, carbon steel 845050 845050 845050 845050 845050
ROLLER’S cutting wheel Cu especially for pipes of the ROLLER’S ROLLER’S
press fi tting systems of copper 845053 845053 845053 845053 845053
ROLLER’S cutting wheel St for steel pipes, cast pipes (SML) 845052 ROLLER’S ROLLER’S 845052 845052 845052 845052
ROLLER’S cutting wheel C-SF especially for pipes of the ROLLER’S ROLLER’S
press fi tting systems/push fi tting systems of carbon steel,
simultaneously produces a chamfer 845055 845055 845055 845055 845055
ROLLER’S cutting wheel V, s 10, for plastic and composite tubes, ROLLER’S ROLLER’S
wall thickness s ≤ 10 mm 845051 845051 845051
ROLLER’S cutting wheel P, s 21, for plastic and composite tubes, ROLLER’S ROLLER’S
wall thickness s ≤ 21 mm 845057
ROLLER’S cutting wheel RF 845054 ROLLER’S ROLLER’S
ROLLER’S battery Li-Ion 21.6 V, 5.0 Ah 571581
ROLLER’S battery Li-Ion 21.6 V, 9.0 Ah 571583
Rapid charger Li-Ion 230 V 571585
Feed lever ROLLER’S Disc 225 845218 845218 845218 845218 845218 845218
Spring plug 089082 089082 Spring plug Spring plug 089082 089082 089082 089082
Base frame 849315 849315 849315
Base frame, movable 849310 849310 849310
Roller, pack of 4 845118 845118
Rollers INOX (pack of 4) of tubular stainless steel 845110 845110
Roller, pack of 4 845119
Roller insert for cutting pipes Ø 40 – 100 mm 845060
Ring spanner size 27/17 849112 849112 849112 849112 849112 849112
ROLLER’S Assistent 3B, material rest with tripod 120120 120120 120120
ROLLER’S Assistent WB, material rest with clamping device 120130 120130 120130
ROLLER’S Assistent XL 12" 120125 120125 120125
Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" 845220 Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" Height adjustable pipe rest 1, Ø 40 – 110 mm, Ø 1½ – 4" 845220
Height adjustable pipe rest 1, Ø 100 – 225 mm, Ø 4 – 8" 845220 , Ø 4 – 8" , Ø 4 – 8"
Height adjustable pipe rest 2, Ø 40 – 110 mm, Ø 1½ – 4" 845230 110 mm, Ø 1½ – 4" 110 mm, Ø 1½ – 4"
ROLLER’S Werkmeister E, folding workbench 120240 120240 120240
ROLLER’S Werkmeister, folding workbench 120200 120200 120200
ROLLER’S Rondo 10 – 54 E, outside/inside pipe deburrer 113835 113835 113835
● Only move or carry the ROLLER’S Disc 100 / ROLLER’S Disc 100 RF /ROLLER’S
Akku-Disc 100 22 V / ROLLER’S Disc 225 by the feed lever (6) when this has
been locked as described in 2.2. If the feed lever is not locked there is a danger
that the feed lever (6) will come away from the spindle (8). ROLLER’S Disc
100 / ROLLER’S Disc 100 RF /ROLLER’S Akku-Disc 100 22 V /ROLLER’S Disc
225 can then fall over or fall off. Danger of injury.
● Protect yourself and persons accompanying the work against the rotating
pipe during cutting. There is a risk of injury.
● Never leave the pipe cutting machine running unattended. Switch off the
pipe cutting machine during longer work breaks and pull out the mains plug/
battery. Electrical devices can cause hazards which lead to material damage or
injury when left unattended.
● Children and persons who, due to their physical, sensory or mental abilities
or lack of experience and knowledge are unable to operate the pipe cutting
machine safely may not use this pipe cutting machine without supervision
or instruction by a responsible person. Otherwise there is a risk of operating
errors and injuries.
● Only allow trained persons to use the pipe cutting machine. Apprentices
may only use the pipe cutting machine when they are over 16, when this is
necessary for their training and when they are supervised by a trained operative.
● The pipe cutting machine is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning the
use of the pipe cutting machine by a person responsible for their safety. Children
must be supervised to ensure that they do not play with the pipe cutting machine.
● Check the power cable of the pipe cutting machine and extension leads
regularly for damage. Have these renewed by qualifi ed experts or an authorised
ROLLER customer service workshop in case of damage.
● Only use approved and appropriately marked extension leads with a suffi cient
cable cross-section. Use extension leads up to a length of 10 m with cable
cross-section 1.5 mm², from 10 – 30 m with cable cross-section 2.5 mm². cross-section 1.5 mm², from 10 – 30 m w cross-section 1.5 mm², from 10 – 30 m w
Safety instructions for batteries
WARNING WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided
with this power tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
See also www.albert-roller.de → Downloads → Instruction Manuals.
Explanation of symbols
WARNING WARNING Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use ear protection
Electrical device complies with protection class II
Not suitable for using outdoors
Environmental friendly disposal
CE conformity mark
13