Roland VIMA JM-8, Руководство пользователя

Страница: 28 / 176

Singing and playing along to a song
28
r
VIMA JM-8
(4) Press the [
®÷ π
] button to start playback.
(5) Start singing or playing at the right moment.
(6) If the song is too loud or too soft, you can change
the balance between the accompaniment and your
solo performance (singing or playing):
Use the [BACKING] knob to increase or decrease the
song level.
If doing so would make the JM-8’s overall level way
too soft, turn the [MIC 1] or [MIC 2
÷
GUITAR] knob
towards the right. (Be careful to avoid distorting the
microphone or guitar signal, though.)
(7) Press the [
ª
] button to stop playback.
Adding effects
Adding reverb to your live performance
The JM-8 provides a reverb effect for the signals
received via the MIC 1 and MIC 2 sockets. Though this
effect is shared by the two sockets, you can set the
amount for each input individually.
(1) Sing or play while setting the desired reverb
amount with the MIC 1 [REVERB] or MIC 2
[REVERB] knob.
The knob to use depends on the socket to which you
connected the microphone (or electric guitar).
Turn it towards the right to increase the amount of
reverb, and to the left to decrease the amount. This
setting can be made for each MIC input separately.
Selecting a different reverb effect
To select a different kind of reverb
effect, proceed as follows.
Note: The setting you make here applies to both the MIC 1
and the MIC 2 sockets.
(1) Press the [EXIT] button repeatedly until it stops
flashing to return to the main page (if necessary).
(2) Press
[MENU]
‰
[VOCAL¥EFFECTS]
.
BACKING
REVERB
JM-8_OM_GB.book Page 28 Wednesday, July 29, 2009 4:43 PM