manualshive.com logo in svg

Roland VIMA JM-8, Руководство пользователя

Поделиться
Скачать
Roland VIMA JM-8 Скачать руководство пользователя страница 13

Front panel

VIMA JM-8 

r

13

By pressing it together with the 

[EXIT]

 button, you 

activate the JM-8’s demo function.

J

EXIT button

This button allows you to leave the currently selected 
display page and to return to the Master page (the 
one that appears when you switch on the JM-8).

K

SONG CONTROL section

The buttons and dial in this section allow you to con-
trol song playback, to record and to burn your perfor-
mances onto a CD. The dial can also be used to set 
the value of the desired parameter. The MARK but-
tons allow you to set and use playback loops.

L

MELODY MUTE/CENTER CANCEL button

This button lets you mute the melody part of the 
selected Standard MIDI File, or attenuate the vocal 
part at the center of an audio file (WAV or mp3), 
allowing you to sing that part yourself.

M

LYRICS button

If you select a (MIDI or audio) song with Lyrics data, 
pressing this button will display the words of that 
song on the external monitor you connect to the 

JM-8. The JM-8 will also display the chords of such 
Standard MIDI files. In addition, you can set how the 
lyrics should be displayed (see p. 36).

Note: 

If you press the [VIDEO MONITOR] button, the lyrics 

also appear in the JM-8’s display.

N

KEY CONTROL section

These buttons allow you to transpose the JM-8 up 
(

[

]

) or down (

[ƒ]

) in semitone steps. This setting 

applies to both MIDI and audio files.

If neither button lights, the Standard MIDI File or 
audio file uses its normal pitch.

O

EJECT button

Press this button to eject the CD in the JM-8’s drive. 
(To insert a CD, simply press it in the slot on the right 
side until the drive picks it up and loads it com-
pletely.)

P

TEMPO buttons

These buttons allow you to reduce (SLOW) or increase 
(FAST) the tempo of the currently selected MIDI or 
audio song. 

Left side panel

Q

AUDIO IN sockets and VIDEO IN socket

The AUDIO IN sockets allow you to connect the audio 
outputs of an external signal source (CD/mp3 player, 
synthesizer, video source connected to VIDEO IN, 
etc.). 

(The [AUDIO IN] knob 

C

 on the front panel allows 

you to set the input level of the signals received via 
these sockets.)

Note: 

The AUDIO IN sockets are stereo (with a left and 

right channel). If you only connect one cable to “L” (or “R”), 
the signal is only audible on the left (or right) channel.

The VIDEO IN socket allows you to connect the video 
output of a video recorder, video camera, DVD player, 
a portable audio/video player, etc.

R

PHONES socket

This is where you can connect a pair of optional 
headphones (Roland RH-series). 

Right side panel

S

CD slot

This is where you insert a CD (see p. 24). Use the 
[EJECT] button 

O

 on the front panel to eject the disc 

that is currently in the JM-8’s drive.

T

Emergency eject hole

If the CD is not ejected when you press the [EJECT] 
button, you can eject it manually by using this hole. 
See “If you are unable to remove the CD” on p. 25 for 
details.

Q

R

S

T

JM-8_OM_GB.book  Page 13  Wednesday, July 29, 2009  4:43 PM

Содержание VIMA JM-8

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды