Roland VersaUV LEF-200, Руководство по первому запуску

Страница: 41 / 52

First Time Printing
39
STEP 2:Loading Media and Setting the Height
1. Loading Media (Media Setup)
NOTE
Be sure to hold the handle of the front cover and open and close it gently.
1.
Check that the following screen is displayed.
SETUP MEDIA
MEMO
When this screen is not displayed, you cannot perform setup. To perform setup, make sure that there is
nothing placed on the flat table, and then press [SETUP] for one second or longer. The flat table will come
forward into a position in which you can set up the media.
2.
Open the front cover.
3.
Secure the media in place.
Printing tests are used to check that no dot drop-out occurs. For printing tests, use media for testing (width
80 × height 70 mm, width 3.1 × height 2.8 in. or bigger), not the media you will actually use.
Media
Secure the media with tape.
Secure the media in place using a substance such as commercially available tape affixed directly to the flat
table. This method can be used for thin paper media or those that can be secured with tape only.
The media can be set anywhere as long as it does not protrude from the flat table.
Be aware that when there are folds or kinks in the media, they might hit the interior of the printer and cause
damage.
4.
Close the front cover.