Roland VersaUV LEF-200, Руководство по первому запуску

Страница: 24 / 52

Prepare for Using This Printer
22
STEP 2: Deciding on an Installation Site
Information is provided in “To Ensure Safe Use” (P. 5). Be sure to read this guide prior to installing or
connecting the printer.
Install the machine in a quiet, stable location offering good operating conditions. An unsuitable location
can cause accidents, fire, faulty operation, or breakdown.
WARNING
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink
fumes.
Unsuitable installation sites
The following locations can cause malfunctions or poor printing quality.
• Locations subject to large fluctuations in temperature or humidity
• Locations subject to shaking or vibration
• Locations where the floor is tilted, not level, or unstable
• Dusty locations
• Locations exposed to direct sunlight
• Locations near air-conditioning or heating equipment
• Locations exposed to water or moving air
• Locations exposed to considerable electrical or magnetic noise or other forms of electromagnetic
energy
MEMO
When you install the machine, check that all four rubber feet of the machine contact the ground.
If any of the rubber feet do not contact the ground, you can adjust their height by rotating them.